Metal 14 Way 14 Module Consumer Unit

Send Inquiry
Metal 14 Way 14 Module Consumer Unit
Details
The Youtai Metal Consumer Unit (UTMCU Series) is a robust, fully enclosed distribution board designed for residential and light commercial applications across Europe and the UK. Built to BS EN 61439-3 standards, it replaces outdated fuse boxes with modern MCB/RCD protection, offering superior safety, flexibility, and ease of installation.
Whether you’re upgrading an old fuse system, wiring a new build, or installing a sub-board, the UTMCU series delivers a clean, code-compliant solution with ample wiring space and durable steel construction.
Category
Metal Consumer Units
Share to
Description

Specifications

 

 

Feature

Detail

Standard Compliance

BS EN 61439-3 (Consumer Unit), BS EN 60947-3 (Main Switch), BS EN 60898-1 (MCB)

Operating Voltage

230V AC, 50/60Hz

Rated Current

40A, 63A, 100A (depends on incoming device)

Protection Rating

IP20 (Indoor Use Only)

Impact Protection

IK05

Material

Cold-rolled steel sheet with white RAL9003 powder coat

Mounting

Wall-mounted (Flush or Surface compatible with optional kits)

Cable Entry

Top, Bottom, Sides, Rear – Multiple knockouts (20mm, 25mm, 32mm, 40mm)

Internal Layout

Raised DIN rail, extra space for RCBOs, flexible circuit configuration

 

Full Model Range – Choose Your Circuit Count

 

 

Model No.

Usable Ways

Width (mm)

Height (mm)

Depth (mm)

Best For

UTMCU4

4 ways

123

243

108

Small flats, sheds, garages

UTMCU5

5 ways

141

243

108

Studio apartments, small offices

UTMCU6

6 ways

158

243

108

1–2 bedroom homes

UTMCU8

8 ways

208

243

108

Standard 3-bedroom house

UTMCU10

10 ways

243

243

108

Larger homes, light commercial

UTMCU14

14 ways

315

243

108

Multi-unit dwellings, workshops

UTMCU18

18 ways

394

243

108

Commercial tenants, large properties

UTMCU22

22 ways

467

243

108

Industrial sub-panels, complex setups

 

Key Features – Built for Electricians, Trusted by Installers

 

 

CE Certified to EU/UK Standards

Fully type-tested to BS EN 61439-3. Complies with Wiring Regulations BS 7671. Ready for inspection.

01

Heavy-Duty Steel Enclosure

Made from cold-rolled steel with matte white polyester powder coating (RAL9003). Resists corrosion, scratches, and impact (IK05 rated).

02

Flexible Cable Entry

Pre-punched knockouts on top, bottom, left, right, and rear:
• Top/Bottom: 20mm, 25mm, 32mm
• Sides: 32mm + 40mm slots
• Rear: Large access slots for trunking or conduit
→ Route cables from any angle, even in tight spaces.

03

Spacious Interior Design

Raised DIN rail creates extra vertical space for neat wire bending and termination. Ample room for RCBOs without crowding.

04

Secure Magnetic Lid Closure

Strong magnet holds the drop-down metal lid firmly shut. Prevents accidental opening while allowing quick access for maintenance.

05

Modular Wiring Configurations

Supports four main types:
• Main Switch CU: All circuits protected by individual MCBs + main isolator
• Dual RCD CU: Two RCDs split circuits into zones (cost-effective compliance)
• High Integrity CU: Mix of RCDs + RCBOs for maximum flexibility
• RCD-only CU: For sub-board applications (no main switch)

06

Pre-Installed Ground & Neutral Bars

Includes dedicated copper busbars for safe, code-compliant grounding and neutral connections.

07

Clear Circuit Labeling Area

Integrated directory card behind the door for easy circuit identification and future troubleshooting.

08

 

Key Applications

 

 

Homeowners replacing old fuse boxes

Electricians installing new builds or renovations

Landlords upgrading rental property electrical systems

Contractors working on social housing or apartment complexes

Facilities managers maintaining commercial sub-panels

 

Our Factory

 

 

We are equipped with complete distribution box production equipment and a strong technical and production team. Meanwhile, we have been continuously updating and upgrading our equipment to meet the diverse needs of customers.

 

image003

 

Fast FAQ – Answers for Pros & DIYers

 

 

Q: Are breakers included?

No - consumer units are sold as enclosures only. Purchase compatible MCBs, RCDs, or RCBOs separately (e.g., Schneider, Hager, ABB, or Youtai's own range).

Q: What's the difference between Dual RCD and High Integrity?

Dual RCD: Two RCDs protect groups of circuits. Cost-effective but less flexible.
High Integrity: Combines RCDs + RCBOs. Allows mixed protection per circuit. Ideal for complex layouts.

Q: Is it compatible with UK-style DIN rails?

Yes - standard 35mm DIN rail. Fits all major European breaker brands.

Q: Do I need a diversity factor?

Yes - if loading MCBs continuously, apply 60% diversity factor per BS 7671 guidelines to avoid overheating.

 

Hot Tags: metal 14 way 14 module consumer unit, China metal 14 way 14 module consumer unit manufacturers, suppliers, factory, 22 Module Consumer Unit, metal consumer units, distribution boxes, 10 Moodule Consumer Unit, 6 Module Consumer Unit, 18 Moodule Consumer Unit

Send Inquiry